Price: $17.00 - $12.92
(as of Sep 24, 2024 11:22:11 UTC – Details)
Product Description
Glasscoat Fiberglass Scrim
Is used during the installation and repair of air ducts to reinforce the joints and seams sealed with air duct sealants. This fiberglass mesh embedded into the sealant provides additional strength, flexibility, and longevity.
Please Note: Glasscoat is not recommended for fiberglass boat repairs. Damaged shrink wrap & label do not constitute reason for damaged return.
For UL 181 Listed Air Ducts
Apply a 25mil tack coat of RCD duct sealantEmbed Glasscoat into the tack coatApply finish coat of 25mils over the Glasscoat
Use RCD Glasscoat Fiberglass Mesh to reinforce joints and seams of:
Sheet Metal, Fiberglass, & Flexible Air Ducts Register Boots Vents & Roof Caps Plenums Thermal Insulation Crawl Space Vapor Retarders
How to Seal Leaking Air Ducts (And Why You Should)
RCD Mastics Help You Save Energy
Leaks in HVAC air duct systems waste energy, money, and reduce indoor air quality. Repairing and sealing sheet metal ductwork, flexible duct, fiberglass duct board, and crawl spaces with RCD Corporation adhesives, mastics, and insulation coatings improves indoor air quality, saves energy, electricity, and money.
CLEAN DUCT SURFACE
Use a cloth to wipe dirt, dust, and from the surface of the duct. If oil or grease is present, wipe clean with a damp cloth.
GAPS LESS THAN 1/8″
Coat the entire joint with a 2” wide by 1/16 of an inch thick continuous strip of mastic, using the end of the brush to work the mastic into the joint.
GAPS GREATER THAN 1/8″
Reinforce with RCD Corporation’s Glasscoat (fiberglass mesh) in addition to mastic. Apply a coat of mastic per (B) above, then embed Glasscoat into this first coat of mastic and finish by applying a second coat of mastic filling the mesh entirely.
Weight/Square Yard: 1.4 – 2.0 ounces Tensile Strength: 60 lbs. per inch of width Thickness: 7 – 9 mils (0.007 – 0.009 inches) width and length: 3 inches wide by 180 feet long Packaged: Roll is shrink wrapped and labeled. Color: White Adhesive: Pressure Sensitive one side Storage Temperature: 45° – 90° F.
3 inch by 180 feet Roll – 10 x 10 Mesh
Coated One Side with Pressure Sensitive Adhesive
Reinforces Joints & Seams Sealed with Mastics & Sealants
In the Fabrication, Installation, & Repair of Air Ducts & Thermal Insulation
Reviews
There are no reviews yet.