Magnetic Iron Powder – Turn Ordinary Primer to Magnetic Primer (1/2 Gallon Mix)

Product Description

For interior use on drywall and plaster to create a magnetic attraction.

STEP 1

Pour 1/2 gallon of white interior oil-based or water-based latex primer into a bucket

STEP 2

Mix entire 1/2 gallon powder mixture with the white interior oil-based or water-based latex primer

STEP 3

Stir iron powder thoroughly into primer prior to use and again between coats, continue to stir product throughout application to keep iron pigments evenly dispersed

STEP 4

Use a dense, 1/4” foam roller and apply with a consistent up and down motion during application.

For best result apply at least four coats of mixed primer to surface, wait for it to dry between coats or follow primer manufacture recoating time

1/2 Gallon Mixture mixed with 1/2 Gallon of white interior oil-based or latex primer.

Contains iron pigment powder. Safety first! Wear protective goggle.

1/2 Gallon Mixture Covers an area of approximately 60 to 80 square feet with two to three coats or about 40 square feet with four coats.

First coat of mixed primer should be sufficient enough to completely hide underlying paint or surface and recoats should be of equal thickness.

It is not advised to store unused mixed primer, dispose responsibly.

Wait 24 hours before applying top coat paint to ensure magnetized surface completely dry. We recommend using one coat of an eggshell paint because it is harder and will hold up to more use than a flat paint. Simply wait until the last coat of the magnetic paint is dry before covering with your color choice of paint.

Perform best with strong heavy-duty rare earth magnets with minimal weight.

Product Dimensions ‏ : ‎ 2 x 3.1 x 7.5 inches; 4.13 Pounds
Item model number ‏ : ‎ MP-2Q16
UPC ‏ : ‎ 792671167990
Manufacturer ‏ : ‎ Wallwork Design
ASIN ‏ : ‎ B0CL99XB74
Country of Origin ‏ : ‎ Taiwan

Magnetic Primer Mixture
Create Any Surface to Attract Magnets
Bond with Oil or Latex Primers